(Msg. 1) Posted: Sat Feb 10, 2007 6:24 pm
Post subject: NT4 + SCSI + IDE Archived from groups: microsoft>public>windowsnt>setup (more info?)
I'm setting up an NT4 machine which boots from SCSI.
The NT explorer doesn't see the Iomega zip drive.
It's connected via the on-motherboard IDE controller and I've installed an
NT4 driver from Iomega.
It's the only device on the channel.
I've tried changing to the second IDE channel.
I'm not using any jumper on the drive, but have also tried the
master-jumper and slave-jumper.
During the POST, the BIOS correctly identifies the drive. I've set the
BIOS as AUTO detect.
(Msg. 2) Posted: Mon Feb 12, 2007 2:25 pm
Post subject: Re: NT4 + SCSI + IDE [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Go to > Control Panel | Devices and verify that the the atapi device is
started. Set the Startup Type as a Boot device.
John
rih5342 wrote:
> I'm setting up an NT4 machine which boots from SCSI.
>
> The NT explorer doesn't see the Iomega zip drive.
> It's connected via the on-motherboard IDE controller and I've installed an
> NT4 driver from Iomega.
>
> It's the only device on the channel.
> I've tried changing to the second IDE channel.
> I'm not using any jumper on the drive, but have also tried the
> master-jumper and slave-jumper.
>
> During the POST, the BIOS correctly identifies the drive. I've set the
> BIOS as AUTO detect.
>
> What am I missing?
>
> Thanks in advance.
>
(Msg. 3) Posted: Mon Feb 12, 2007 2:53 pm
Post subject: Re: NT4 + SCSI + IDE [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
do you have ide disk controller driver installed on this machine? It is not
neccessary on scsi only sytem, especially when F6 option of installer was
needed foir installation (this disable autodect and autoload of drivers
during install, so everything should be installed manually during
installation or later).
try to add either standard ATAPI/IDE driver (preferably SP4 version of it,
but even build version should work) or motheboard specific IDE disk
controller driver.
"rih5342" <rob.hickey DeleteThis @nospam.alum.mit.edu> píąe v diskusním příspěvku
news:69c5662f1962374868611059e88aa8c7@localhost.talkaboutsoftware.com...
>
> I'm setting up an NT4 machine which boots from SCSI.
>
> The NT explorer doesn't see the Iomega zip drive.
> It's connected via the on-motherboard IDE controller and I've installed an
> NT4 driver from Iomega.
>
> It's the only device on the channel.
> I've tried changing to the second IDE channel.
> I'm not using any jumper on the drive, but have also tried the
> master-jumper and slave-jumper.
>
> During the POST, the BIOS correctly identifies the drive. I've set the
> BIOS as AUTO detect.
>
> What am I missing?
>
> Thanks in advance.
>
(Msg. 4) Posted: Mon Feb 12, 2007 9:20 pm
Post subject: Re: NT4 + SCSI + IDE [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Duh!
Control-Panel/Devices/Atapi, startup as boot, worked!
(Msg. 5) Posted: Mon Feb 12, 2007 10:31 pm
Post subject: Re: NT4 + SCSI + IDE [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
All times are: Eastern Time (US & Canada) (change)
Page 1 of 1
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum
Home
Forums
Home
FAQ
Profile
Private Messages
Log in
Windows Other