(Msg. 1) Posted: Sun Nov 09, 2008 10:21 pm
Post subject: Help: Changing Windows 98 Administrator Archived from groups: microsoft>public>win98>gen_discussion (more info?)
Does anyone know how to change the administrator in Windows 98?
My hard drive went down and I was forced to dig out an old drive in
order to get back on the internet.
The old drive belonged to my brother, and even though no password is
needed to get to the desktop his name appears in the Administrator
field.
I would like to get rid of this box altogether rather than to have to
click cancel when it pops up, and also since I cannot change the
monitor settings which are stuck at 640 x 480, I was thinking that
perhaps I may need administrator privileges to change that. (But
correct me if I'm wrong).
The pages look terrible and I hate having to use a slide bar to read
messages.
(Msg. 2) Posted: Mon Nov 10, 2008 7:36 am
Post subject: Re: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Searcher7 asked :-
> Does anyone know how to change the administrator in Windows 98?
Try http://billsway.com/vbspage/
and look for the 'Change Registered Owner and/or Organization' VBS tool (6th
from top in 2nd set)
> ... also since I cannot change the
> monitor settings which are stuck at 640 x 480,
Probably need to re-install the correct driver for your video card (display
adapter) as the one on the disk would be for "your brother's" computer and
not the one installed on your pc.
Mart
"Searcher7" <Searcher7 DeleteThis @mail.con2.com> wrote in message
news:999d30f6-9c11-473b-90cf-557aaed6d782@35g2000pry.googlegroups.com...
> Does anyone know how to change the administrator in Windows 98?
>
> My hard drive went down and I was forced to dig out an old drive in
> order to get back on the internet.
>
> The old drive belonged to my brother, and even though no password is
> needed to get to the desktop his name appears in the Administrator
> field.
>
> I would like to get rid of this box altogether rather than to have to
> click cancel when it pops up, and also since I cannot change the
> monitor settings which are stuck at 640 x 480, I was thinking that
> perhaps I may need administrator privileges to change that. (But
> correct me if I'm wrong).
>
> The pages look terrible and I hate having to use a slide bar to read
> messages.
>
> Any help would be appreciated.
>
> Thanks.
>
> Darren Harris
> Staten Island, New York.
(Msg. 3) Posted: Mon Nov 10, 2008 6:51 pm
Post subject: Re: Help: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
There is no "administrator" in Win98.
Perhaps the old drive was from a different operating system?
On Sun, 9 Nov 2008 22:21:13 -0800 (PST), in
microsoft.public.win98.gen_discussion, Searcher7
<Searcher7.TakeThisOut@mail.con2.com> wrote:
>Does anyone know how to change the administrator in Windows 98?
>
>My hard drive went down and I was forced to dig out an old drive in
>order to get back on the internet.
>
>The old drive belonged to my brother, and even though no password is
>needed to get to the desktop his name appears in the Administrator
>field.
>
>I would like to get rid of this box altogether rather than to have to
>click cancel when it pops up,
(Msg. 4) Posted: Mon Nov 10, 2008 6:51 pm
Post subject: Re: Help: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
"Alan Edwards" <edwards RemoveThis @southcom.com.au> wrote in message
news:gtpfh4plpgo7v2f7ffv8bi238cjbd860co@4ax.com...
> There is no "administrator" in Win98.
> Perhaps the old drive was from a different operating system?
>
> ...Alan
>
Correct.
I was thinking the OP may have just meant the log-on name.
If that was it, all you need do is backspace over it
and type in your name.
Also...as to the video.
It's as simple as IDing the card, then going to the mfgs' website
and getting the correct drivers...
then installing them.
To ID the video card, just have a look at it and find the mfg and model
number...
or use a utility such as HWINFO32
(Msg. 5) Posted: Tue Nov 11, 2008 11:08 pm
Post subject: Re: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
"Searcher7" <Searcher7 RemoveThis @mail.con2.com> wrote in message
news:999d30f6-9c11-473b-90cf-557aaed6d782@35g2000pry.googlegroups.com...
> Does anyone know how to change the administrator in Windows 98?
>
> My hard drive went down and I was forced to dig out an old drive in
> order to get back on the internet.
>
> The old drive belonged to my brother, and even though no password is
> needed to get to the desktop his name appears in the Administrator
> field.
>
> I would like to get rid of this box altogether rather than to have to
> click cancel when it pops up, and also since I cannot change the
> monitor settings which are stuck at 640 x 480, I was thinking that
> perhaps I may need administrator privileges to change that. (But
> correct me if I'm wrong).
>
> The pages look terrible and I hate having to use a slide bar to read
> messages.
>
> Any help would be appreciated.
>
> Thanks.
>
> Darren Harris
> Staten Island, New York.
If as I suspect, you mean the User Login prompt during boot,see:
*Note: If you have user profiles this will not work as stated in the article and
you will have to perform the steps in the link provided in the article for user
profiles.
It has also been advised that you do not use the article Q135586, which has a
link included in the article. Its purpose is "to clear the User Name logon box
so it is blank each time you start Windows", it is not meant to prevent the
logon box from prompting you for a name/password.
Instead if you have TweakUI installed, check to make sure the "Clear Last User
At Logon" check box is not checked. Go to Start > Settings > Control Panel,
double click Tweak UI, click the Paranoia tab, if the box is checked, uncheck
it.
(Msg. 6) Posted: Wed Nov 12, 2008 6:02 pm
Post subject: Re: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On Nov 10, 2:36 am, "Mart" <mart(NoSpam)@nospam.nospam> wrote:
> Searcher7 asked :-
>
> > Does anyone know how to change the administrator in Windows 98?
>
> Tryhttp://billsway.com/vbspage/ > and look for the 'Change Registered Owner and/or Organization' VBS tool (6th
> from top in 2nd set)
Ok, I downloaded and installed that, but have no idea how to get it to
work. I changed my brother's name to my name in the change owner/
organization utility, but it had no effect at all.
> > ... also since I cannot change the
> > monitor settings which are stuck at 640 x 480,
>
> Probably need to re-install the correct driver for your video card (display
> adapter) as the one on the disk would be for "your brother's" computer and
> not the one installed on your pc.
(Msg. 7) Posted: Wed Nov 12, 2008 6:04 pm
Post subject: Re: Help: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On Nov 10, 2:51 am, Alan Edwards <edwa....RemoveThis@southcom.com.au> wrote:
> There is no "administrator" in Win98.
> Perhaps the old drive was from a different operating system?
Ok, I guess administrator was the wrong word. (I'm used to seeing that
on a Windows XP drive I also need to re-format).
(Msg. 8) Posted: Wed Nov 12, 2008 6:07 pm
Post subject: Re: Help: Changing Windows 98 Administrator [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On Nov 10, 8:42 am, "philo" <ph... RemoveThis @privacy.net> wrote:
> "Alan Edwards" <edwa... RemoveThis @southcom.com.au> wrote in message
>
> news:gtpfh4plpgo7v2f7ffv8bi238cjbd860co@4ax.com...
>
> > There is no "administrator" in Win98.
> > Perhaps the old drive was from a different operating system?
>
> > ...Alan
>
> Correct.
>
> I was thinking the OP may have just meant the log-on name.
>
> If that was it, all you need do is backspace over it
> and type in your name.
The name is "permanent". I cannot backspace over it. I have to click
"Cancel" to get the desktop.
> Also...as to the video.
> It's as simple as IDing the card, then going to the mfgs' website
> and getting the correct drivers...
> then installing them.
All times are: Eastern Time (US & Canada) (change) Goto page 1, 2, 3
Page 1 of 3
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum