(Msg. 1) Posted: Sat Mar 22, 2008 8:06 am
Post subject: wireless netwrok problem Archived from groups: microsoft>public>windowsxp>configuration_manage (more info?)
Dear all
Not sure where I can get support, so I am posting here in the hope
someone can point me in the right direction please.
I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
forgotten the wep key. I also cannot load the configuration page to
reset it.
There is no support section on the Newlink website.
Can anyone help please?
Barry
(Msg. 2) Posted: Sat Mar 22, 2008 11:41 am
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
"Barry" <robert.angus RemoveThis @ntlworld.com> wrote in message
news:u63Fj.28257$kN5.21862@newsfe1-gui.ntli.net...
> Dear all
> Not sure where I can get support, so I am posting here in the hope someone can
> point me in the right direction please.
>
> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have forgotten the
> wep key. I also cannot load the configuration page to reset it.
>
> There is no support section on the Newlink website.
> Can anyone help please?
> Barry
Did your Wireless Access Point (WAP) come with a manual?
How about an installation CD? If so, check for a manual on the CD.
If you can't find the manual, a Google search turns up this file.
In the box that pops up, leave the user name line blank and enter the correct
password, if you configured one earlier, and click OK. If you did not set up a
password, leave the password line blank. If you set up a password and now cannot
remember it, you will have to hit Reset button on the back of the WAP to restore
the factory default settings.
Once you've launched the web interface, it looks like you need to click on
Wireless Security in the left hand column. From there, use the instructions on
page 13 of the manual to reset your WEP key to something you'll remember. You'll
now need to use that key in all the devices that are connected through the WAP.
On a side note, WEP is the weakest form of security you can use with a wireless
network. If possible, you should use WPA.
(Msg. 3) Posted: Mon Mar 24, 2008 11:57 am
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On Mar 22, 3:06 am, Barry <robert.an....RemoveThis@ntlworld.com> wrote:
> Dear all
> Not sure where I can get support, so I am posting here in the hope
> someone can point me in the right direction please.
>
> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
> forgotten the wep key. I also cannot load the configuration page to
> reset it.
>
> There is no support section on the Newlink website.
> Can anyone help please?
> Barry
The only way you could fix this is to locate how to complete "reset"
this AP back to the factory defaults. However, the only document for
this AP is supposed to be a user guide, which is already "damaged"
prior to downloading.
(Msg. 4) Posted: Tue Mar 25, 2008 1:17 pm
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On 24/03/2008 smlunatick <yveslec.RemoveThis@gmail.com> wrote:
>On Mar 22, 3:06 am, Barry <robert.an....RemoveThis@ntlworld.com> wrote:
>> Dear all
>> Not sure where I can get support, so I am posting here in the hope
>> someone can point me in the right direction please.
>>
>> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
>> forgotten the wep key. I also cannot load the configuration page to
>> reset it.
>>
>> There is no support section on the Newlink website.
>> Can anyone help please?
>> Barry
>
>The only way you could fix this is to locate how to complete "reset"
>this AP back to the factory defaults. However, the only document for
>this AP is supposed to be a user guide, which is already "damaged"
>prior to downloading.
>
>One suggestion is to "ditched" this Newlink 11g Access Point. A
>possible replacment unit is:
>http://www.trendnet.com/langen/products/proddetail.asp?prod=120_TEW-637AP&
>cat=78&status=view
>
>TRENDnet offers support.
(Msg. 5) Posted: Wed Mar 26, 2008 9:57 am
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
On Mar 26, 5:39 am, Barry <robert.an... RemoveThis @ntlworld.com> wrote:
> Dear smlunatick
> Many thanks for taking the time to reply.
> I found the manual and have done a reset as you suggested, my laptop is
> now picking up a default access point, at full strength, but I still
> cannot access the setup page via 192.168.1.100 as shown in the manual.
>
> Perhaps you are right, I need to repalce it!
> Many thanks
> Barry
>
>
>
> smlunatick wrote:
> > On 24/03/2008 smlunatick <yves... RemoveThis @gmail.com> wrote:
> >> On Mar 22, 3:06 am, Barry <robert.an... RemoveThis @ntlworld.com> wrote:
> >>> Dear all
> >>> Not sure where I can get support, so I am posting here in the hope
> >>> someone can point me in the right direction please.
>
> >>> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
> >>> forgotten the wep key. I also cannot load the configuration page to
> >>> reset it.
>
> >>> There is no support section on the Newlink website.
> >>> Can anyone help please?
> >>> Barry
> >> The only way you could fix this is to locate how to complete "reset"
> >> this AP back to the factory defaults. However, the only document for
> >> this AP is supposed to be a user guide, which is already "damaged"
> >> prior to downloading.
>
> >> One suggestion is to "ditched" this Newlink 11g Access Point. A
> >> possible replacment unit is:
> >>http://www.trendnet.com/langen/products/proddetail.asp?prod=120_TEW-6....
> >> cat=78&status=view
>
> >> TRENDnet offers support.- Hide quoted text -
>
> - Show quoted text -
You need to check and make sure that the wireless network that you
access is definately yours and not neighbor's. Turn the power off on
your AP and check to see if you still connect to the same wireless
network. If yes, it is not your wireless network.
(Msg. 6) Posted: Wed Mar 26, 2008 10:36 am
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Dear Nepatsfan
Many thanks for your reply.
I have the manual, and have gone through the reset process etc and I
have also gone to start. rune but all I get is not found page so it
appears the unit may have stopped working correctly.
I have a wireless network being picked up by my laptop, as a default
access point, with no security and I am getting a full signal, so I am
assuming this is my access point due to a full signal, but if this is my
access point, I still cannot get in to the setup page via 192.168.1.100
as shown in the manual.
Many thanks for oyur help.
Regards
Barry
Nepatsfan wrote:
> "Barry" <robert.angus.RemoveThis@ntlworld.com> wrote in message
> news:u63Fj.28257$kN5.21862@newsfe1-gui.ntli.net...
>> Dear all
>> Not sure where I can get support, so I am posting here in the hope someone can
>> point me in the right direction please.
>>
>> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have forgotten the
>> wep key. I also cannot load the configuration page to reset it.
>>
>> There is no support section on the Newlink website.
>> Can anyone help please?
>> Barry
>
>
> Did your Wireless Access Point (WAP) come with a manual?
>
> How about an installation CD? If so, check for a manual on the CD.
>
> If you can't find the manual, a Google search turns up this file.
>
> 802.11g Wireless LAN Access Point User Guide
> http://www.lanshop.co.uk/downloads/NLWL-ACC01/802.11gWirelessAccessPoint.pdf >
> According to page 5 of the manual you can access the WAP's web interface by
> doing the following.
>
> Go to Start -> Run and enter the following in the Open box and click OK.
>
> http://192.168.1.100 >
> In the box that pops up, leave the user name line blank and enter the correct
> password, if you configured one earlier, and click OK. If you did not set up a
> password, leave the password line blank. If you set up a password and now cannot
> remember it, you will have to hit Reset button on the back of the WAP to restore
> the factory default settings.
>
> Once you've launched the web interface, it looks like you need to click on
> Wireless Security in the left hand column. From there, use the instructions on
> page 13 of the manual to reset your WEP key to something you'll remember. You'll
> now need to use that key in all the devices that are connected through the WAP.
>
> On a side note, WEP is the weakest form of security you can use with a wireless
> network. If possible, you should use WPA.
>
> Good luck
>
> Nepatsfan
>
>
>
(Msg. 7) Posted: Wed Mar 26, 2008 10:39 am
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Dear smlunatick
Many thanks for taking the time to reply.
I found the manual and have done a reset as you suggested, my laptop is
now picking up a default access point, at full strength, but I still
cannot access the setup page via 192.168.1.100 as shown in the manual.
Perhaps you are right, I need to repalce it!
Many thanks
Barry
smlunatick wrote:
> On 24/03/2008 smlunatick <yveslec RemoveThis @gmail.com> wrote:
>> On Mar 22, 3:06 am, Barry <robert.an... RemoveThis @ntlworld.com> wrote:
>>> Dear all
>>> Not sure where I can get support, so I am posting here in the hope
>>> someone can point me in the right direction please.
>>>
>>> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
>>> forgotten the wep key. I also cannot load the configuration page to
>>> reset it.
>>>
>>> There is no support section on the Newlink website.
>>> Can anyone help please?
>>> Barry
>> The only way you could fix this is to locate how to complete "reset"
>> this AP back to the factory defaults. However, the only document for
>> this AP is supposed to be a user guide, which is already "damaged"
>> prior to downloading.
>>
>> One suggestion is to "ditched" this Newlink 11g Access Point. A
>> possible replacment unit is:
>> http://www.trendnet.com/langen/products/proddetail.asp?prod=120_TEW-637AP& >> cat=78&status=view
>>
>> TRENDnet offers support.
>
(Msg. 8) Posted: Wed Mar 26, 2008 3:59 pm
Post subject: Re: wireless netwrok problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Go to Start -> Run and enter cmd.exe in the Open box.
Enter the following command next to the prompt.
ipconfig /all > C:\Ipconfig.txt
Next, go to My Computer or Windows Explorer and open your C drive.
Open Ipconfig.txt.
Copy the contents of this file and paste it into a response to this message.
Nepatsfan
"Barry" <robert.angus.RemoveThis@ntlworld.com> wrote in message
news:sGpGj.463$jl2.59@newsfe2-gui.ntli.net...
>
> Dear Nepatsfan
> Many thanks for your reply.
> I have the manual, and have gone through the reset process etc and I have also
> gone to start. rune but all I get is not found page so it appears the unit may
> have stopped working correctly.
>
> I have a wireless network being picked up by my laptop, as a default access
> point, with no security and I am getting a full signal, so I am assuming this
> is my access point due to a full signal, but if this is my access point, I
> still cannot get in to the setup page via 192.168.1.100 as shown in the
> manual.
>
> Many thanks for oyur help.
> Regards
> Barry
>
>
>
> Nepatsfan wrote:
>> "Barry" <robert.angus.RemoveThis@ntlworld.com> wrote in message
>> news:u63Fj.28257$kN5.21862@newsfe1-gui.ntli.net...
>>> Dear all
>>> Not sure where I can get support, so I am posting here in the hope someone
>>> can point me in the right direction please.
>>>
>>> I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have forgotten
>>> the wep key. I also cannot load the configuration page to reset it.
>>>
>>> There is no support section on the Newlink website.
>>> Can anyone help please?
>>> Barry
>>
>>
>> Did your Wireless Access Point (WAP) come with a manual?
>>
>> How about an installation CD? If so, check for a manual on the CD.
>>
>> If you can't find the manual, a Google search turns up this file.
>>
>> 802.11g Wireless LAN Access Point User Guide
>> http://www.lanshop.co.uk/downloads/NLWL-ACC01/802.11gWirelessAccessPoint.pdf >>
>> According to page 5 of the manual you can access the WAP's web interface by
>> doing the following.
>>
>> Go to Start -> Run and enter the following in the Open box and click OK.
>>
>> http://192.168.1.100 >>
>> In the box that pops up, leave the user name line blank and enter the correct
>> password, if you configured one earlier, and click OK. If you did not set up
>> a password, leave the password line blank. If you set up a password and now
>> cannot remember it, you will have to hit Reset button on the back of the WAP
>> to restore the factory default settings.
>>
>> Once you've launched the web interface, it looks like you need to click on
>> Wireless Security in the left hand column. From there, use the instructions
>> on page 13 of the manual to reset your WEP key to something you'll remember.
>> You'll now need to use that key in all the devices that are connected through
>> the WAP.
>>
>> On a side note, WEP is the weakest form of security you can use with a
>> wireless network. If possible, you should use WPA.
>>
>> Good luck
>>
>> Nepatsfan
>>
>>
All times are: Eastern Time (US & Canada) (change) Goto page 1, 2
Page 1 of 2
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum
Home
Forums
Home
FAQ
Profile
Private Messages
Log in
Windows XP