I have a unique question/problem. I have 7 home-built pc's all running
different hardware with Win XP Home (OEM) installed in each. I need a
magnifier to read the COA stickers, so I took the liberty of writing the
product keys on the cd case for each machine. The kids are always messing
something up, so fresh installs are common around here.
During a reinstall on pc1, I inadvertantly used the wrong product key (COA),
and it was activated over the net before I knew there was a problem. I
discovered the mistake after reinstalling XP on pc2 using the same product
key. PC2 is the correct machine for that key. I found the cd case for pc1
under a pile of mail on my desk. I don't dare try to activate pc2 not knowing
what might happen. Wouldn't want to be labeled a pirate!
Now I have 2 pc's with fresh installs under the same product key and one
homeless product key. It takes about two days per machine to install and
configure all the software and drivers. I can't believe I did that!
Is there a way to change the product keys on both machines to ensure the
right keys are again associated with the correct pc's, without doing new
installs? Given that the product key was activated on the wrong pc, will it
even work on the correct one now?
"gman127" wrote in message
I have a unique question/problem. I have 7 home-built pc's all running
different hardware with Win XP Home (OEM) installed in each. I need a
magnifier to read the COA stickers, so I took the liberty of writing the
product keys on the cd case for each machine. The kids are always messing
something up, so fresh installs are common around here.
During a reinstall on pc1, I inadvertantly used the wrong product key (COA),
and it was activated over the net before I knew there was a problem. I
discovered the mistake after reinstalling XP on pc2 using the same product
key. PC2 is the correct machine for that key. I found the cd case for pc1
under a pile of mail on my desk. I don't dare try to activate pc2 not knowing
what might happen. Wouldn't want to be labeled a pirate!
Now I have 2 pc's with fresh installs under the same product key and one
homeless product key. It takes about two days per machine to install and
configure all the software and drivers. I can't believe I did that!
Is there a way to change the product keys on both machines to ensure the
right keys are again associated with the correct pc's, without doing new
installs? Given that the product key was activated on the wrong pc, will it
even work on the correct one now?
(Msg. 3) Posted: Mon Jul 14, 2008 6:42 pm
Post subject: Re: Wrong Product Key (COA) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Thanks Carey... I will do that! Even when I get the right key in pc1, I will
probably not be able to activate pc2 over the net, since its key was recently
mistakenly activated in pc1. I may end up on the phone trying to explain all
this.
"Carey Frisch [MVP]" wrote:
> Try using the Windows Product Key Update Tool:
> http://www.microsoft.com/genuine/selfhelp/PKUInstructions.aspx >
> --
> Carey Frisch
> Microsoft MVP
> Windows Desktop Experience -
> Windows Vista Enthusiast
>
> ---------------------------------------------------------------
>
> "gman127" wrote in message > I have a unique question/problem. I have 7 home-built pc's all running
> different hardware with Win XP Home (OEM) installed in each. I need a
> magnifier to read the COA stickers, so I took the liberty of writing the
> product keys on the cd case for each machine. The kids are always messing
> something up, so fresh installs are common around here.
>
> During a reinstall on pc1, I inadvertantly used the wrong product key (COA),
> and it was activated over the net before I knew there was a problem. I
> discovered the mistake after reinstalling XP on pc2 using the same product
> key. PC2 is the correct machine for that key. I found the cd case for pc1
> under a pile of mail on my desk. I don't dare try to activate pc2 not knowing
> what might happen. Wouldn't want to be labeled a pirate!
>
> Now I have 2 pc's with fresh installs under the same product key and one
> homeless product key. It takes about two days per machine to install and
> configure all the software and drivers. I can't believe I did that!
>
> Is there a way to change the product keys on both machines to ensure the
> right keys are again associated with the correct pc's, without doing new
> installs? Given that the product key was activated on the wrong pc, will it
> even work on the correct one now?
>
> Thanks,
> Gary
>
(Msg. 4) Posted: Mon Jul 14, 2008 6:59 pm
Post subject: Re: Wrong Product Key (COA) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
The product key is not locked to a particular CD--it is locked to the
particular type of CD (OEM vs retail, Home vs Pro, etc.) The update tool
that Carey provided the link to should fix you right up.
--
Regards
Ron Badour
MS MVP
Windows Desktop Experience
"gman127" wrote in message
>I have a unique question/problem. I have 7 home-built pc's all running
> different hardware with Win XP Home (OEM) installed in each. I need a
> magnifier to read the COA stickers, so I took the liberty of writing the
> product keys on the cd case for each machine. The kids are always messing
> something up, so fresh installs are common around here.
>
> During a reinstall on pc1, I inadvertantly used the wrong product key
> (COA),
> and it was activated over the net before I knew there was a problem. I
> discovered the mistake after reinstalling XP on pc2 using the same product
> key. PC2 is the correct machine for that key. I found the cd case for pc1
> under a pile of mail on my desk. I don't dare try to activate pc2 not
> knowing
> what might happen. Wouldn't want to be labeled a pirate!
>
> Now I have 2 pc's with fresh installs under the same product key and one
> homeless product key. It takes about two days per machine to install and
> configure all the software and drivers. I can't believe I did that!
>
> Is there a way to change the product keys on both machines to ensure the
> right keys are again associated with the correct pc's, without doing new
> installs? Given that the product key was activated on the wrong pc, will
> it
> even work on the correct one now?
>
> Thanks,
> Gary
(Msg. 5) Posted: Mon Jul 14, 2008 6:59 pm
Post subject: Re: Wrong Product Key (COA) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Thanks Ron! Since all seven cd's are XP Home SP2, all seven product keys
will work with any one of them. The keys are what I'm concerned about since
they are each individually tied to a particular box of hardware.
I don't know why pc1 (with the wrong key) was able to be activated over the
net, since the hardware in that box is completely different from pc2, the box
previously tied to that product key.
When I change the product key in pc1, there's probably a good chance I won't
be able to activate pc2 over the net, because of the recent activation using
its product key. Anyway, I will give it a try. ~ Gary
"Ron Badour" wrote:
> The product key is not locked to a particular CD--it is locked to the
> particular type of CD (OEM vs retail, Home vs Pro, etc.) The update tool
> that Carey provided the link to should fix you right up.
>
> --
> Regards
>
> Ron Badour
> MS MVP
> Windows Desktop Experience
>
>
> "gman127" wrote in message
> > >I have a unique question/problem. I have 7 home-built pc's all running
> > different hardware with Win XP Home (OEM) installed in each. I need a
> > magnifier to read the COA stickers, so I took the liberty of writing the
> > product keys on the cd case for each machine. The kids are always messing
> > something up, so fresh installs are common around here.
> >
> > During a reinstall on pc1, I inadvertantly used the wrong product key
> > (COA),
> > and it was activated over the net before I knew there was a problem. I
> > discovered the mistake after reinstalling XP on pc2 using the same product
> > key. PC2 is the correct machine for that key. I found the cd case for pc1
> > under a pile of mail on my desk. I don't dare try to activate pc2 not
> > knowing
> > what might happen. Wouldn't want to be labeled a pirate!
> >
> > Now I have 2 pc's with fresh installs under the same product key and one
> > homeless product key. It takes about two days per machine to install and
> > configure all the software and drivers. I can't believe I did that!
> >
> > Is there a way to change the product keys on both machines to ensure the
> > right keys are again associated with the correct pc's, without doing new
> > installs? Given that the product key was activated on the wrong pc, will
> > it
> > even work on the correct one now?
> >
> > Thanks,
> > Gary
>
>
>
(Msg. 6) Posted: Tue Jul 15, 2008 12:00 am
Post subject: Re: Wrong Product Key (COA) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
And to save yourself a lot of grief in the future, I would recommend that
when you get the machines up and running the way you want them, either drive
image or clone the drive the operating system is on to another drive for
each of your machines using a program like Acronis True Image. Then when
the kids screw up the system the rebuild will be minutes instead of days.
Well worth the money.
"gman127" wrote in message
> Thanks Ron! Since all seven cd's are XP Home SP2, all seven product keys
> will work with any one of them. The keys are what I'm concerned about
> since
> they are each individually tied to a particular box of hardware.
>
> I don't know why pc1 (with the wrong key) was able to be activated over
> the
> net, since the hardware in that box is completely different from pc2, the
> box
> previously tied to that product key.
>
> When I change the product key in pc1, there's probably a good chance I
> won't
> be able to activate pc2 over the net, because of the recent activation
> using
> its product key. Anyway, I will give it a try. ~ Gary
>
> "Ron Badour" wrote:
>
>> The product key is not locked to a particular CD--it is locked to the
>> particular type of CD (OEM vs retail, Home vs Pro, etc.) The update
>> tool
>> that Carey provided the link to should fix you right up.
>>
>> --
>> Regards
>>
>> Ron Badour
>> MS MVP
>> Windows Desktop Experience
>>
>>
>> "gman127" wrote in message
>> >> >I have a unique question/problem. I have 7 home-built pc's all running
>> > different hardware with Win XP Home (OEM) installed in each. I need a
>> > magnifier to read the COA stickers, so I took the liberty of writing
>> > the
>> > product keys on the cd case for each machine. The kids are always
>> > messing
>> > something up, so fresh installs are common around here.
>> >
>> > During a reinstall on pc1, I inadvertantly used the wrong product key
>> > (COA),
>> > and it was activated over the net before I knew there was a problem. I
>> > discovered the mistake after reinstalling XP on pc2 using the same
>> > product
>> > key. PC2 is the correct machine for that key. I found the cd case for
>> > pc1
>> > under a pile of mail on my desk. I don't dare try to activate pc2 not
>> > knowing
>> > what might happen. Wouldn't want to be labeled a pirate!
>> >
>> > Now I have 2 pc's with fresh installs under the same product key and
>> > one
>> > homeless product key. It takes about two days per machine to install
>> > and
>> > configure all the software and drivers. I can't believe I did that!
>> >
>> > Is there a way to change the product keys on both machines to ensure
>> > the
>> > right keys are again associated with the correct pc's, without doing
>> > new
>> > installs? Given that the product key was activated on the wrong pc,
>> > will
>> > it
>> > even work on the correct one now?
>> >
>> > Thanks,
>> > Gary
>>
>>
>>
(Msg. 7) Posted: Tue Jul 15, 2008 6:47 am
Post subject: Re: Wrong Product Key (COA) [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
=?Utf-8?B?Z21hbjEyNw==?= écrivait
> Thanks Ron! Since all seven cd's are XP Home SP2, all seven product
> keys will work with any one of them. The keys are what I'm concerned
> about since they are each individually tied to a particular box of
> hardware.
>
> I don't know why pc1 (with the wrong key) was able to be activated
> over the net, since the hardware in that box is completely different
> from pc2, the box previously tied to that product key.
>
> When I change the product key in pc1, there's probably a good chance I
> won't be able to activate pc2 over the net, because of the recent
> activation using its product key. Anyway, I will give it a try. ~
> Gary
>
> "Ron Badour" wrote:
>
>> The product key is not locked to a particular CD--it is locked to the
>> particular type of CD (OEM vs retail, Home vs Pro, etc.) The
>> update tool that Carey provided the link to should fix you right up.
>>
>> --
>> Regards
>>
>> Ron Badour
>> MS MVP
>> Windows Desktop Experience
>>
<snip>
If I were you, I wouldn't touch pc1 since it's already up and running and
activated.
What I would do is use the Product Key Update Tool mentioned earlier on
PC2 and use the key that was on PC1 before you reformatted, if it's been
more than 120 days since that key was activated (on the previous PC1
installation), there shouldn't be any problem activating on-line.
Now you will have PC1 using the previous PC2 key, and PC2 using the
previous PC1 key, I don't see any problem there.
All times are: Eastern Time (US & Canada) Goto page 1, 2
Page 1 of 2
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum
Home
Forums
Home
FAQ
Search
Profile
Private Messages
Log in
Windows XP