(Msg. 1) Posted: Wed Jan 16, 2008 10:20 pm
Post subject: Windows Defender will not start or run Add to elertz Archived from groups: microsoft>public>windows>vista>security (more info?)
An interesting error occurred on my desktop with the Vista 64 bit during the
first part of December '07.
For the first time since Vista was loaded (about 1 October) I thought that I
would start Windows Defender and scan the computer. This would be the first
time in over two months. I got the following message:
-----------------------------------------
Windows Defender ---
Application failed to initialize: 0x800106ba. A problem caused this
program's service to stop. To start the service, restart your computer or
search Help and Support for how to start a service manually.
-----------------------------------------
So I rebooted. Got the same message. So I went to the various places on
the internet trying to find a solution to start Defender. None have worked
so far. There were a lot of threads on XP, but I only found one on Vista.
I even uninstalled MS Update <KB931099>, which was suppose to be a complete
new Win Defender install and then reinstalled it again (with a reboot in
between). No soap either with this change. Everything works OK on the
desktop so I have gave up to find a solution at that time.
I checked my laptop (Vista 32 bit) and defender works as it should. I could
always go back to the repair of Vista on the desktop and I might do that
sometime in the future. Any help or comments would be appreciated.
(Msg. 2) Posted: Thu Jan 17, 2008 1:00 pm
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
are you running Microsoft OneCare?
If so, windows defender is turned off in One Care because One Care has its
one built in WD.
Some people had a problem after the last MS update.
I personally do not use OneCare because of all its problems.
robin
"Bquinn" <wquinn1.DeleteThis@tampabay.rr.com> wrote in message
news:u6fk0fLWIHA.5208@TK2MSFTNGP04.phx.gbl...
> An interesting error occurred on my desktop with the Vista 64 bit during
> the
> first part of December '07.
>
> For the first time since Vista was loaded (about 1 October) I thought that
> I
> would start Windows Defender and scan the computer. This would be the
> first
> time in over two months. I got the following message:
> -----------------------------------------
> Windows Defender ---
> Application failed to initialize: 0x800106ba. A problem caused this
> program's service to stop. To start the service, restart your computer or
> search Help and Support for how to start a service manually.
> -----------------------------------------
> So I rebooted. Got the same message. So I went to the various places on
> the internet trying to find a solution to start Defender. None have
> worked
> so far. There were a lot of threads on XP, but I only found one on Vista.
>
> I even uninstalled MS Update <KB931099>, which was suppose to be a
> complete
> new Win Defender install and then reinstalled it again (with a reboot in
> between). No soap either with this change. Everything works OK on the
> desktop so I have gave up to find a solution at that time.
>
> I checked my laptop (Vista 32 bit) and defender works as it should. I
> could
> always go back to the repair of Vista on the desktop and I might do that
> sometime in the future. Any help or comments would be appreciated.
>
> Thanks!
>
> Bquinn
>
>
(Msg. 3) Posted: Thu Jan 17, 2008 7:53 pm
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
No Robin I am not running MS One Care.
Thanks for the information.
Bquinn
"Robinb" <robin@discussion> wrote in message
news:%23qirVLTWIHA.2000@TK2MSFTNGP05.phx.gbl...
> are you running Microsoft OneCare?
> If so, windows defender is turned off in One Care because One Care has its
> one built in WD.
> Some people had a problem after the last MS update.
> I personally do not use OneCare because of all its problems.
> robin
> "Bquinn" <wquinn1.RemoveThis@tampabay.rr.com> wrote in message
> news:u6fk0fLWIHA.5208@TK2MSFTNGP04.phx.gbl...
>> An interesting error occurred on my desktop with the Vista 64 bit during
>> the
>> first part of December '07.
>>
>> For the first time since Vista was loaded (about 1 October) I thought
>> that I
>> would start Windows Defender and scan the computer. This would be the
>> first
>> time in over two months. I got the following message:
>> -----------------------------------------
>> Windows Defender ---
>> Application failed to initialize: 0x800106ba. A problem caused this
>> program's service to stop. To start the service, restart your computer
>> or
>> search Help and Support for how to start a service manually.
>> -----------------------------------------
>> So I rebooted. Got the same message. So I went to the various places on
>> the internet trying to find a solution to start Defender. None have
>> worked
>> so far. There were a lot of threads on XP, but I only found one on
>> Vista.
>>
>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> complete
>> new Win Defender install and then reinstalled it again (with a reboot in
>> between). No soap either with this change. Everything works OK on the
>> desktop so I have gave up to find a solution at that time.
>>
>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> could
>> always go back to the repair of Vista on the desktop and I might do that
>> sometime in the future. Any help or comments would be appreciated.
>>
>> Thanks!
>>
>> Bquinn
>>
>>
>
>
(Msg. 4) Posted: Fri Jan 18, 2008 12:53 pm
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
try going to the WD newsgroup (I belong there too)
there are a great bunch of people who might be able to answer this better
To view these newsgroups with Outlook Express or another NNTP newsreader,
you might be required to log on using the following information:
.. Server: privatenews.microsoft.com
.. Account name: privatenews\spyware
.. Password: spyware (case-sensitive)
pick microsoft.private.security.spyware.general
robin
"Bquinn" <wquinn1 RemoveThis @tampabay.rr.com> wrote in message
news:uxrNByWWIHA.5980@TK2MSFTNGP04.phx.gbl...
> No Robin I am not running MS One Care.
>
> Thanks for the information.
>
> Bquinn
>
> "Robinb" <robin@discussion> wrote in message
> news:%23qirVLTWIHA.2000@TK2MSFTNGP05.phx.gbl...
>> are you running Microsoft OneCare?
>> If so, windows defender is turned off in One Care because One Care has
>> its one built in WD.
>> Some people had a problem after the last MS update.
>> I personally do not use OneCare because of all its problems.
>> robin
>> "Bquinn" <wquinn1 RemoveThis @tampabay.rr.com> wrote in message
>> news:u6fk0fLWIHA.5208@TK2MSFTNGP04.phx.gbl...
>>> An interesting error occurred on my desktop with the Vista 64 bit during
>>> the
>>> first part of December '07.
>>>
>>> For the first time since Vista was loaded (about 1 October) I thought
>>> that I
>>> would start Windows Defender and scan the computer. This would be the
>>> first
>>> time in over two months. I got the following message:
>>> -----------------------------------------
>>> Windows Defender ---
>>> Application failed to initialize: 0x800106ba. A problem caused this
>>> program's service to stop. To start the service, restart your computer
>>> or
>>> search Help and Support for how to start a service manually.
>>> -----------------------------------------
>>> So I rebooted. Got the same message. So I went to the various places
>>> on
>>> the internet trying to find a solution to start Defender. None have
>>> worked
>>> so far. There were a lot of threads on XP, but I only found one on
>>> Vista.
>>>
>>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>>> complete
>>> new Win Defender install and then reinstalled it again (with a reboot in
>>> between). No soap either with this change. Everything works OK on the
>>> desktop so I have gave up to find a solution at that time.
>>>
>>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>>> could
>>> always go back to the repair of Vista on the desktop and I might do that
>>> sometime in the future. Any help or comments would be appreciated.
>>>
>>> Thanks!
>>>
>>> Bquinn
>>>
>>>
>>
>>
>
(Msg. 5) Posted: Sun Jan 20, 2008 2:55 pm
Post subject: RE: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
I have the same issues with my system. Did you ever get an answer to the
error issue?
"Bquinn" wrote:
> An interesting error occurred on my desktop with the Vista 64 bit during the
> first part of December '07.
>
> For the first time since Vista was loaded (about 1 October) I thought that I
> would start Windows Defender and scan the computer. This would be the first
> time in over two months. I got the following message:
> -----------------------------------------
> Windows Defender ---
> Application failed to initialize: 0x800106ba. A problem caused this
> program's service to stop. To start the service, restart your computer or
> search Help and Support for how to start a service manually.
> -----------------------------------------
> So I rebooted. Got the same message. So I went to the various places on
> the internet trying to find a solution to start Defender. None have worked
> so far. There were a lot of threads on XP, but I only found one on Vista.
>
> I even uninstalled MS Update <KB931099>, which was suppose to be a complete
> new Win Defender install and then reinstalled it again (with a reboot in
> between). No soap either with this change. Everything works OK on the
> desktop so I have gave up to find a solution at that time.
>
> I checked my laptop (Vista 32 bit) and defender works as it should. I could
> always go back to the repair of Vista on the desktop and I might do that
> sometime in the future. Any help or comments would be appreciated.
>
> Thanks!
>
> Bquinn
>
>
>
(Msg. 6) Posted: Sun Jan 20, 2008 7:19 pm
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
No answers yet nor have I found a solution. I am not going to reinstall the
Vista since everything else works and works well.
Bquinn
"mhenry" <mhenry.DeleteThis@discussions.microsoft.com> wrote in message
news:90784944-184F-4022-85B3-3E36137AD137@microsoft.com...
>I have the same issues with my system. Did you ever get an answer to the
> error issue?
>
> "Bquinn" wrote:
>
>> An interesting error occurred on my desktop with the Vista 64 bit during
>> the
>> first part of December '07.
>>
>> For the first time since Vista was loaded (about 1 October) I thought
>> that I
>> would start Windows Defender and scan the computer. This would be the
>> first
>> time in over two months. I got the following message:
>> -----------------------------------------
>> Windows Defender ---
>> Application failed to initialize: 0x800106ba. A problem caused this
>> program's service to stop. To start the service, restart your computer
>> or
>> search Help and Support for how to start a service manually.
>> -----------------------------------------
>> So I rebooted. Got the same message. So I went to the various places on
>> the internet trying to find a solution to start Defender. None have
>> worked
>> so far. There were a lot of threads on XP, but I only found one on
>> Vista.
>>
>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> complete
>> new Win Defender install and then reinstalled it again (with a reboot in
>> between). No soap either with this change. Everything works OK on the
>> desktop so I have gave up to find a solution at that time.
>>
>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> could
>> always go back to the repair of Vista on the desktop and I might do that
>> sometime in the future. Any help or comments would be appreciated.
>>
>> Thanks!
>>
>> Bquinn
>>
>>
>>
(Msg. 7) Posted: Tue Mar 25, 2008 2:40 am
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Don't know whether this will help you or not, but I have a post open on
similar lines see post "Win Defender non start?"
For some reason, don't ask me why, but my defender is now starting 8 times
out of 10 (I'm logging it) after I re-checked some of the option boxes, see
my post. On the non start occasions, I am manually starting with no issues. I
still don't understand why though the security centre is not giving warnings.
Be interested to know if this helps you though!
--
W4 me
"Bquinn" wrote:
> No answers yet nor have I found a solution. I am not going to reinstall the
> Vista since everything else works and works well.
>
> Bquinn
>
> "mhenry" <mhenry.TakeThisOut@discussions.microsoft.com> wrote in message
> news:90784944-184F-4022-85B3-3E36137AD137@microsoft.com...
> >I have the same issues with my system. Did you ever get an answer to the
> > error issue?
> >
> > "Bquinn" wrote:
> >
> >> An interesting error occurred on my desktop with the Vista 64 bit during
> >> the
> >> first part of December '07.
> >>
> >> For the first time since Vista was loaded (about 1 October) I thought
> >> that I
> >> would start Windows Defender and scan the computer. This would be the
> >> first
> >> time in over two months. I got the following message:
> >> -----------------------------------------
> >> Windows Defender ---
> >> Application failed to initialize: 0x800106ba. A problem caused this
> >> program's service to stop. To start the service, restart your computer
> >> or
> >> search Help and Support for how to start a service manually.
> >> -----------------------------------------
> >> So I rebooted. Got the same message. So I went to the various places on
> >> the internet trying to find a solution to start Defender. None have
> >> worked
> >> so far. There were a lot of threads on XP, but I only found one on
> >> Vista.
> >>
> >> I even uninstalled MS Update <KB931099>, which was suppose to be a
> >> complete
> >> new Win Defender install and then reinstalled it again (with a reboot in
> >> between). No soap either with this change. Everything works OK on the
> >> desktop so I have gave up to find a solution at that time.
> >>
> >> I checked my laptop (Vista 32 bit) and defender works as it should. I
> >> could
> >> always go back to the repair of Vista on the desktop and I might do that
> >> sometime in the future. Any help or comments would be appreciated.
> >>
> >> Thanks!
> >>
> >> Bquinn
> >>
> >>
> >>
>
>
(Msg. 8) Posted: Tue Mar 25, 2008 10:30 am
Post subject: Re: Windows Defender will not start or run Add to elertz [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
What have you done so far?
Did you set the WD service to "Automatic"?
Start>Programs>Administrative Tools>Services.
-------
*Report back, please*
[When responding to posts, please include the post(s) you are replying to so
that others may learn and benefit from the issue]
> "Bquinn" wrote:
>
>> No answers yet nor have I found a solution. I am not going to reinstall
>> the
>> Vista since everything else works and works well.
>>
>> Bquinn
>>
>> "mhenry" <mhenry DeleteThis @discussions.microsoft.com> wrote in message
>> news:90784944-184F-4022-85B3-3E36137AD137@microsoft.com...
>> >I have the same issues with my system. Did you ever get an answer to
>> >the
>> > error issue?
>> >
>> > "Bquinn" wrote:
>> >
>> >> An interesting error occurred on my desktop with the Vista 64 bit
>> >> during
>> >> the
>> >> first part of December '07.
>> >>
>> >> For the first time since Vista was loaded (about 1 October) I thought
>> >> that I
>> >> would start Windows Defender and scan the computer. This would be the
>> >> first
>> >> time in over two months. I got the following message:
>> >> -----------------------------------------
>> >> Windows Defender ---
>> >> Application failed to initialize: 0x800106ba. A problem caused this
>> >> program's service to stop. To start the service, restart your
>> >> computer
>> >> or
>> >> search Help and Support for how to start a service manually.
>> >> -----------------------------------------
>> >> So I rebooted. Got the same message. So I went to the various places
>> >> on
>> >> the internet trying to find a solution to start Defender. None have
>> >> worked
>> >> so far. There were a lot of threads on XP, but I only found one on
>> >> Vista.
>> >>
>> >> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> >> complete
>> >> new Win Defender install and then reinstalled it again (with a reboot
>> >> in
>> >> between). No soap either with this change. Everything works OK on
>> >> the
>> >> desktop so I have gave up to find a solution at that time.
>> >>
>> >> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> >> could
>> >> always go back to the repair of Vista on the desktop and I might do
>> >> that
>> >> sometime in the future. Any help or comments would be appreciated.
>> >>
>> >> Thanks!
>> >>
>> >> Bquinn
>> >>
>> >>
>> >>
>>
>>
All times are: Eastern Time (US & Canada) (change) Goto page 1, 2
Page 1 of 2
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Home
Forums
Home
FAQ
Search
Profile
Private Messages
Log in/Register/Password
Windows Vista