Front Page Error Message 425

We tried to follow the instructions of the link indicated but it still
doesn't work.

When trying to publish, we do the following:
File - Publish Site - Enter Password -
And this is when the error message "425 Could not open data connection to
port 5003. Connection timed out " comes up. When doing further attempts the
port number/error message changes: 5004, 5005, etc.

The remote website properties are set as follows:
- FTP: Ticked.
- Remote website location: ftp://snorkelpark.com
- Use passive FTP: Unticked.

We have been publishing changes/updates to the website up to this point and
it's been working fine.

Do you have any further suggestions?

Thanks!!!



"Stefan B Rusynko" wrote:

> FP does not use port 5001
> - how are you trying to publish
> Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish using
> FTP (port 21)
> See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
>
> --
>
> _____________________________________________
> SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> "Warning - Using the F1 Key will not break anything!" (-;
> _____________________________________________
>
>
> "Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
> | We are trying to publish changes to our website (www.snorkelpark.com) and
> | keep on getting the same error message in Front Page:
> | "425 Could not open data connection to port 5001. Connection timed out. "
> |
> | We verified our firewall setting and also contacted our website host GoDaddy
> | but have not been able find how to rectify the error message.
> |
> | Would appreciate any suggestions. Thanks in advance.
>
>
>

Switch to Remote Site view and set up your remote site properties to use FTP

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
To find the best Newsgroup for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
_____________________________________________


"Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message news:15C8FAF4-8142-433F-86EB-B1E086C31F26@microsoft.com...
| We tried to follow the instructions of the link indicated but it still
| doesn't work.
|
| When trying to publish, we do the following:
| File - Publish Site - Enter Password -
| And this is when the error message "425 Could not open data connection to
| port 5003. Connection timed out " comes up. When doing further attempts the
| port number/error message changes: 5004, 5005, etc.
|
| The remote website properties are set as follows:
| - FTP: Ticked.
| - Remote website location: ftp://snorkelpark.com
| - Use passive FTP: Unticked.
|
| We have been publishing changes/updates to the website up to this point and
| it's been working fine.
|
| Do you have any further suggestions?
|
| Thanks!!!
|
|
|
| "Stefan B Rusynko" wrote:
|
| > FP does not use port 5001
| > - how are you trying to publish
| > Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish
using
| > FTP (port 21)
| > See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
| >
| > --
| >
| > _____________________________________________
| > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > "Warning - Using the F1 Key will not break anything!" (-;
| > _____________________________________________
| >
| >
| > "Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
| > | We are trying to publish changes to our website (www.snorkelpark.com) and
| > | keep on getting the same error message in Front Page:
| > | "425 Could not open data connection to port 5001. Connection timed out. "
| > |
| > | We verified our firewall setting and also contacted our website host GoDaddy
| > | but have not been able find how to rectify the error message.
| > |
| > | Would appreciate any suggestions. Thanks in advance.
| >
| >
| >

Tried that. Same error message came up again: "425 Could not open data
connection to port 5001. Connection timed out " ??


"Stefan B Rusynko" wrote:

> FP does not use port 5001
> - how are you trying to publish
> Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish using
> FTP (port 21)
> See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
>
> --
>
> _____________________________________________
> SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> "Warning - Using the F1 Key will not break anything!" (-;
> _____________________________________________
>
>
> "Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
> | We are trying to publish changes to our website (www.snorkelpark.com) and
> | keep on getting the same error message in Front Page:
> | "425 Could not open data connection to port 5001. Connection timed out. "
> |
> | We verified our firewall setting and also contacted our website host GoDaddy
> | but have not been able find how to rectify the error message.
> |
> | Would appreciate any suggestions. Thanks in advance.
>
>
>

If the "Use Passive FTP" box is ticked, clear it, or tick the box if it
is unticked.

--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.

http://www.rxs-enterprises.org/fp




"Nadja" <Nadja.RemoveThis@discussions.microsoft.com> wrote in message
news:56230F2E-2A92-4D60-91EC-347C577C15FD@microsoft.com:

> Tried that. Same error message came up again: "425 Could not open data
> connection to port 5001. Connection timed out " ??
>
>
> "Stefan B Rusynko" wrote:
>
> > FP does not use port 5001
> > - how are you trying to publish
> > Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish using
> > FTP (port 21)
> > See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
> >
> > --
> >
> > _____________________________________________
> > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> > "Warning - Using the F1 Key will not break anything!" (-;
> > _____________________________________________
> >
> >
> > "Nadja" <Nadja.RemoveThis@discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
> > | We are trying to publish changes to our website (www.snorkelpark.com) and
> > | keep on getting the same error message in Front Page:
> > | "425 Could not open data connection to port 5001. Connection timed out. "
> > |
> > | We verified our firewall setting and also contacted our website host GoDaddy
> > | but have not been able find how to rectify the error message.
> > |
> > | Would appreciate any suggestions. Thanks in advance.
> >
> >
> >

Ronx,

"Use Passive FTP" box was unticked and we ticked it and the error message
didn't come up. However, every single page and file in both columns (local
website & remote website) shows a question mark, the unchanged ones, as welll
as the couple of files we changed. Why is this and how do we rectify that?

We looked at the MO Front Page Help and it says:
Conflict: The local and remote Web site files were changed simultaneously,
prior to one being synchronized with the other.
Action: Merge the changes from one file to the other manually, and then
overwrite the file.

How do we merge the changes from one file to the other manually? What about
the files that were not modified?

Thanks again.


"Ronx" wrote:

> If the "Use Passive FTP" box is ticked, clear it, or tick the box if it
> is unticked.
>
> --
> Ron Symonds - Microsoft MVP (FrontPage)
> Reply only to group - emails will be deleted unread.
>
> http://www.rxs-enterprises.org/fp
>
>
>
>
> "Nadja" <Nadja.DeleteThis@discussions.microsoft.com> wrote in message
> news:56230F2E-2A92-4D60-91EC-347C577C15FD@microsoft.com:
>
> > Tried that. Same error message came up again: "425 Could not open data
> > connection to port 5001. Connection timed out " ??
> >
> >
> > "Stefan B Rusynko" wrote:
> >
> > > FP does not use port 5001
> > > - how are you trying to publish
> > > Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish using
> > > FTP (port 21)
> > > See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
> > >
> > > --
> > >
> > > _____________________________________________
> > > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> > > "Warning - Using the F1 Key will not break anything!" (-;
> > > _____________________________________________
> > >
> > >
> > > "Nadja" <Nadja.DeleteThis@discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
> > > | We are trying to publish changes to our website (www.snorkelpark.com) and
> > > | keep on getting the same error message in Front Page:
> > > | "425 Could not open data connection to port 5001. Connection timed out. "
> > > |
> > > | We verified our firewall setting and also contacted our website host GoDaddy
> > > | but have not been able find how to rectify the error message.
> > > |
> > > | Would appreciate any suggestions. Thanks in advance.
> > >
> > >
> > >
>
>

It appears that the two sites have gone out of synch. The best way to
bring them back into synch is to:
Run Tools->Recalculate Hyperlinks in the local site, then:
Publish All pages, either from Local to Remote or Remote to Local. The
direction is determined by which site is up to data - publish that one.

After publishing All pages you should be able to get back to publishing
changed pages only.

Before the full publish, in Remote Web Site Properties-Publishing tab,
change the method of choosing how changes are determined:
Select "Determine changes by comparing..." or "Use source file
timestamps..." - whichever is not selected now, and see if that makes a
difference.

--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.

http://www.rxs-enterprises.org/fp




"Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message
news:757D4746-CC2F-458A-8ED2-1C79DD4072F2@microsoft.com:

> Ronx,
>
> "Use Passive FTP" box was unticked and we ticked it and the error message
> didn't come up. However, every single page and file in both columns (local
> website & remote website) shows a question mark, the unchanged ones, as welll
> as the couple of files we changed. Why is this and how do we rectify that?
>
> We looked at the MO Front Page Help and it says:
> Conflict: The local and remote Web site files were changed simultaneously,
> prior to one being synchronized with the other.
> Action: Merge the changes from one file to the other manually, and then
> overwrite the file.
>
> How do we merge the changes from one file to the other manually? What about
> the files that were not modified?
>
> Thanks again.
>
>
> "Ronx" wrote:
>
> > If the "Use Passive FTP" box is ticked, clear it, or tick the box if it
> > is unticked.
> >
> > --
> > Ron Symonds - Microsoft MVP (FrontPage)
> > Reply only to group - emails will be deleted unread.
> >
> > http://www.rxs-enterprises.org/fp
> >
> >
> >
> >
> > "Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message
> > news:56230F2E-2A92-4D60-91EC-347C577C15FD@microsoft.com:
> >
> > > Tried that. Same error message came up again: "425 Could not open data
> > > connection to port 5001. Connection timed out " ??
> > >
> > >
> > > "Stefan B Rusynko" wrote:
> > >
> > > > FP does not use port 5001
> > > > - how are you trying to publish
> > > > Since http://www.snorkelpark.com/_vti_inf.html indicates you do not have the FP Se installed on the site you need to publish using
> > > > FTP (port 21)
> > > > See http://support.microsoft.com/default.aspx?scid=kb;en-us;825503&Product=fp2003
> > > >
> > > > --
> > > >
> > > > _____________________________________________
> > > > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> > > > "Warning - Using the F1 Key will not break anything!" (-;
> > > > _____________________________________________
> > > >
> > > >
> > > > "Nadja" <Nadja DeleteThis @discussions.microsoft.com> wrote in message news:2D675A79-1760-4437-8BDA-746B85B2B9B8@microsoft.com...
> > > > | We are trying to publish changes to our website (www.snorkelpark.com) and
> > > > | keep on getting the same error message in Front Page:
> > > > | "425 Could not open data connection to port 5001. Connection timed out. "
> > > > |
> > > > | We verified our firewall setting and also contacted our website host GoDaddy
> > > > | but have not been able find how to rectify the error message.
> > > > |
> > > > | Would appreciate any suggestions. Thanks in advance.
> > > >
> > > >
> > > >
> >
> >